# For more options and information see
# http://rpf.io/configtxtreadme
# Some settings may impact device functionality. See link above for details

# uncomment if you get no picture on HDMI for a default "safe" mode
#hdmi_safe=1
disable_splash=1

# uncomment this if your display has a black border of unused pixels visible
# and your display can output without overscan
#disable_overscan=1

# uncomment the following to adjust overscan. Use positive numbers if console
# goes off screen, and negative if there is too much border
#overscan_left=16
#overscan_right=16
#overscan_top=16
#overscan_bottom=16

# uncomment to force a console size. By default it will be display's size minus
# overscan.
#framebuffer_width=1280
#framebuffer_height=720
#resolution for 24inch half size 1920 x 1200
#framebuffer_width=960
#framebuffer_height=600

# uncomment if hdmi display is not detected and composite is being output
#hdmi_force_hotplug=1

# uncomment to force a specific HDMI mode (this will force VGA)
#hdmi_group=1
#hdmi_mode=1

# uncomment to force a HDMI mode rather than DVI. This can make audio work in
# DMT (computer monitor) modes
#hdmi_drive=2

# uncomment to increase signal to HDMI, if you have interference, blanking, or
# no display
#config_hdmi_boost=4

# uncomment for composite PAL
#sdtv_mode=2

#uncomment to overclock the arm. 700 MHz is the default.
arm_freq=800

# Uncomment some or all of these to enable the optional hardware interfaces
#dtparam=i2c_arm=on
#dtparam=i2s=on
#dtparam=spi=on

# Uncomment this to enable the lirc-rpi module
#dtoverlay=lirc-rpi

# Additional overlays and parameters are documented /boot/overlays/README

# Enable audio (loads snd_bcm2835)
dtparam=audio=on
#gpu_mem=512


disable_audio_dither=1
#audio_pwm_mode=2

## Aufloesung fest einstellen ##
################################
##hdmi auch ohne Monitor im Betrieb
hdmi_force_hotplug=1
# DMT Modus aktivieren
hdmi_group=2
## Aufloesungen alle 60hz
# 1024x768
#hdmi_mode=16
# 1280x768
#hdmi_mode=23
# 1366x768
#hdmi_mode=81
# 1920x1080
#hdmi_mode=82
# 1280x720p
#hdmi_mode=85
# 640x480
hdmi_mode=4
# 800x600
#hdmi_mode=9
# check with tvservice -s for available resolution of our monitor

# oc settings
gpu_mem=256
#gpu_mem_256=128
#gpu_mem_512=256
#gpu_mem_1024=256
#arm_freq=1450
#gpu_freq=500
#sdram_freq=550
#over_voltage=8
#force_turbo=1